The focus is on the measurement of non-conductive liquids. This meter is designed for the measurement of e.g. oil or demineralized water. Due to the measuring principle, an inlet or outlet section is not required.
TECHNICAL DATA
| Nominal size | DN10,DN15,DN25 |
| Process connection | TriClamp according to DIN 32676 |
| Material |
Housing: stainless steel Oval wheels: stainless steel, PEEK Seals: EPDM, alternatively Viton |
| Flow Range |
0.2 to 5 l/min – 2,000 Pulses/ 1 to 30 l/min – 1,000 Pulses/l 2 to 50 l/min – 400 Pulses/l 4 to 100 l/min – 200 Pulses/l |
| Accuracy | ±0,25% to ±0,5% |
| Repeatability | ±0,1% |
| Viscosity | 0,3 to 1.500 mPa·s |
| Process temperature |
Liquid temperature: -10°C to +130°C (-14°F to 266°F) ambient temperature: -20°C to +70°C (-4°F to 158°F) |
| Process pressure | max. 16 bar |
| Ex-protection | not available |
SPECIAL FEATURES
- Fillings from 10 ml possible
- very short dosing times > 250ms
- high resolution (e.g. DN10: 2000 pulses/l)
- large selection of filling quantities with different nominal sizes
- can be combined with the batch controller
CHARACTERISTICS
- direct measurement of volume
- measurement of non-conductive and conductive liquids
- high accuracy / repeatability also for small quantities
- high long-term stability