Oval Wheel Meters Type OaP / OP are used for measuring liquid raw, intermediate and finished products such as liquefied gases, gasolines, heating oils, lubricating oils, transmission oils, solvents, bitumen, alkaline solutions, acids and other chemical liquids.
TECHNICAL DATA
| Nominal size | 25 to 400 mm (1/4“ bis 16“) |
| Process connection | Flanges according to DIN or ANSI |
| Material |
Pressure relevant: cast steel |
| Flow Range | 5 to 24.000 l/min (1.32 to 6,340 gal/min) |
| Accuracy | ±0,05% to ±0,5% |
| Repeatability | ±0,02% |
| Viscosity | 0,1 to 100.000 mPa·s |
| Process temperature | -40°C to 290°C (-40°F to 554°F) |
| Process pressure | max. 100 bar (1,450 psi) |
| Ex-protection | Flame proof or intrinsically safe |
SPECIAL FEATURES
- double case meter Design
- no straight inlet and outlet pipe sections required
- measuring principle independent of the viscosity
- compact design
- easy start-up
- maintenance-free
- the only SIL 2 oval wheel meter world wide
- broad range of custody transfer approvals
CHARACTERISTICS
- oval wheel meters for low- , mid-, and high viscosity liquids
- high measurement accuracy
- low pressure loss
- high life time