
LB 414 | |
---|---|
Detector operating data | |
Power supply | 100 ... 240 VAC +/–10 %, 50 ... 60 Hz max. 10 VA |
Cable connections | 3 cable entries, 1x M20, 2x M16 |
Maximum cable length | 3300 m (120 Ω), 1600 m (250 Ω), 800 m (500 Ω) |
Wire cross section | 0,5 ... 1,5 mm2 (bis 2,5 mm2 without wire-end sleeves) |
Housing material | Stainless steel ISO 1.4301 / AISI 304 (others on request) |
Water cooling | Option (can also be retrofitted), max. 6 bar |
Scintillator size Weight Weight with Collimator Ø x length [mm] [kg] cooling system [kg] | |
CrystalSENS (Point detectors) | 50 x 60 Polymer 10 13,5 Option 40 x 35 NaI(Tl) 10 13,5 Option |
Ambient temperature | -20 ... +60°C (-4 ... +140°F) |
Temperature stability | ≤ 0.002 %/°C (–20 ... +50 °C) |
Detector certificates & tests | |
Environmental tests | IP protection: IP66 / IP67 |
Other certificates | CCSAUS general area |
Inputs and outputs | |
Signal output | HART 4 ... 20 mA potential-free, active or passive |
Digital output | Relay (SPDT) optionally for: Status indicators, min./max. alarm, Detector temperature |
Software | |
Measurement application | Density/Concentration: g/cm3, kg/m3, g/l, SGU, lb/gal, lb/ft3, Solids content: % (wt/wt) |
User Interfaces | Local User Interface, HART, PC Interface |
Data backup | in non-volatile memory |
Options and accessories | |
PC software for parameter setting | |
Accessory kit | Stainless steel lid and cable glands |
Accessory kitExternal communication | M20 adapter and cable for detector service modem |
IR remote control | Infrared remote control for local user interface |
Locking | Protects polymer lid from unintended removal |